Toyota Avensis ZZT251 2003 Service And Repair Manual page 1536

FAST:
7 (+1) – 2 (EW)
Voltage between terminals
OB
Washer
O
Switch
)( )CV
7(+1) – 2(EW) (V
Voltage be-
Approx. (-F
tween terminals
seconds
AVENSIS REPAIR MANUAL (RM1018E)
WIPER & WASHER
(5)
Connect the battery (–)
to terminal 16 (+S)
1.6 @ 1 second
(c) Operation Check (Front Wiper)
(1)
(2)
(3)
Approx. E-E
seconds
I30007
2. WINDSHIELD WIPER SWITCH ASSY (W/ RAIN
SENSING WIPER)
(a) Continuity Check
(1)
Standard:
Front Wiper Switch
Switch position
E65758
Rear Wiper Switch (w/ Rear Wiper)
Switch position
Front Washer Switch
Switch position
http://vnx.su
– WIPER AND WASHER SYSTEM
Connect the battery (–) to the terminal 16 (+S) of the
connector. Operate the intermittent wiper relay and
check voltage between terminal 7 (+1) and terminal
2 (EW).
SLOW: Connect the battery (–)
to terminal 16 (+S)
10.7 @ 5 seconds
Turn the wiper switch into OFF position.
Connect the battery (+) to the terminal 17 (+B) of the
connector, the battery (–) to the terminal 16 (+S)
and the terminal 2 (EW) of the connecter.
Connect the voltmeter (+) terminal to the terminal 7
(+1) of the connector and the voltmeter (–) terminal
to the terminal 2 (EW) of the connector. Turn the
washer switch ON and OFF, and check voltage be-
tween terminal 7 (+1) and terminal 2 (EW).
Check continuity of each terminal of the connector.
Tester condition
MIST 7 (+1) – 17 (+B)
OFF 7 (+1) – 16 (+S)
7 (+1) – 16 (+S),
AUTO
13 (AUTO) – 15 (E)
LO 7 (+1) – (17+B)
HI 8 (+2) – 17 (+B)
Tester condition
OFF –
INT 2 (EW) – 4 (CIR)
ON 2 (EW) – 10 (+1R)
Tester condition
OFF –
ON 2 (EW) – 11 (WF)
66–7
E56399
Specified condition
Continuity
Continuity
Continuity
Continuity
Continuity
Specified condition
No continuity
Continuity
Continuity
Specified condition
No continuity
Continuity