Table of Contents
Advertisement
66–10
Wagon Type:
Automatic Stop Position
170Y x 3Y
Lift Back Type:
Automatic Stop Position
160Y x 3Y
AVENSIS REPAIR MANUAL (RM1018E)
WIPER & WASHER
–
WIPER AND WASHER SYSTEM
5.
REAR WIPER MOTOR ASSY
(a)
Connect the battery (+) to the terminal 1 (+B) of the con-
nector, the battery (–) to the terminal 3 (LS) of the connec-
tor and rear wiper motor assy body, and check that the
rear wiper motor assy operate.
E68141
(b)
Automatic Stop Position Operation Check
(1)
Connect the battery (+) to the terminal 1 (+B) of the
connector, the battery (–) to the terminal 3 (LS) of
the connector and rear wiper motor assy body. With
the motor being rotated disconnect the terminal 3
(LS) from the battery (–), then check that the wiper
motor stops automatically at the automatic stop
position.
E67355
6.
HEADLAMP CLEANER SWITCH ASSY
(a)
Check that there is continuity between terminal at each
switch position as shown in the chart.
Switch operation
OFF
ON
Illumination circuit
(b)
Inspect illumination operation.
(1)
Connect the positive (+) lead from the battery to the
E68111
terminal 3 and negative (–) lead to the terminal 2,
then check that the illumination comes on.
http://vnx.su
Tester connection
Specified condition
1 (E) – 4 (R)
No continuity
1 (E) – 4 (R)
2 (ILL) – 3 (ILL+)
Continuity
Continuity
Advertisement
Table of Contents
