Show Ip Rip Interface - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
vrf VRF-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Summary address entries will appear in the database only if relevant child routes exist and are being
summarized. When the last child route for a summary address becomes invalid, the summary address is
also removed from the routing table.
Example
This example shows how to display a summary address.
Switch# Show ip rip database
Codes: R - RIP, Rc - RIP connected, K - Kernel,
C – Connected, S – Static, O – OSPF, B – BGP, I – IS-IS, A – Aggregate
Network
Rc 10.1.0.0/16
Rc 20.0.0.0/8
R 30.0.0.0/8
RA 10.0.0.0/8
Total Entries: 4 entries, 5 routes
Switch#
93-14

show ip rip interface

This command is used to display interface specific information for RIP.
show ip rip interface
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
(Optional) Specifies to display the routing information in the VRF
instance.
Next Hop Metric From
1
1
20.33.24.1 2 20.33.24.1
40.33.24.8 5 40.33.24.2
2
1161
If Time
vlan1
vlan2
vlan2 0DT0H2M44S
vlan3 0DT0H2M30S
0DT0H0M59S