D-Link DXS-3600 Series Cli Reference Manual page 1317

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to enter the time range configuration mode before using the periodic command to
specify a time period. When a time-range is created without any time interval (periodic) setting, it implies
that there is not any active period for the time-range.
Example
This example shows how to enter the time range configuration mode for the time-range profile, named
"rdtime".
Switch# configure terminal
Switch(config)# time-range rdtime
Switch(config-time-range)#
1312