DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Name: VC5/120.1.1.2
Description:
Local AC: vpls101, Status: Up
VLAN mode: Default, 802.1q tunneling Ethernet Type: 0x8100
Remote AC Status: Up
MPLS VC Labels: Local 19, Remote 19
Outbound Tunnel label: 103
MTU: Local 1500, Remote 1500
Group ID: Local 0, Remote 0
Signaling Protocol: LDP
Local VCCV Capabilities:
CC: Type 2
CV: LSP ping
Remote VCCV Capabilities:
CC: Type 2
CV: LSP ping
VC Statistics:
RX Bytes: 0, RX Packets: 0
TX Bytes: 0, TX Packets: 0
Total Entries: 1
Switch#
117-12
show vpls
This command is used to display VPLS information.
show vpls [VPLS-NAME] [detail]
Parameters
VPLS-NAME
detail
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display VPLS (detailed) information.
Example
This example shows how to display all VPLS information.
Switch# show vpls
(Optional) Specifies the VPLS name. This name can be up to 32
characters long.
(Optional) Specifies to display detailed VPLS information.
1359