D-Link DXS-3600 Series Cli Reference Manual page 1446

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Trap Name
mplsLdpInitSessionThresholdEx
ceeded
mplsLdpPathVectorLimitMismatc
h
mplsLdpSessionUp
mplsLdpSessionDown
LLDP
Trap Name
lldpRemTablesChange
lldpXMedTopologyChangeDetect
ed
MAC-based Access Control
Trap Name
dMacAuthLoggedSuccess
dMacAuthLoggedFail
Description
This notification is generated when the backoff is
enabled, and the number of Session Initialization
messages exceeds the value of the
'mplsLdpEntityInitSessionThreshold'
This notification is sent when
the'mplsLdpEntityPathVectorLimit' does NOT match
the value of the 'mplsLdpPeerPathVectorLimit' for a
specific Entity.
If this notification is sent when the value of
'mplsLdpSessionState' enters the 'operational(5)'
state
This notification is sent when the value of
'mplsLdpSessionState' leaves the 'operational(5)'
state
Description
A lldpRemTablesChange notification is sent when
the value of lldpStatsRemTableLastChangeTime
changes. It can be utilized by an NMS to trigger
LLDP remote systems table maintenance polls.
Binding:
(1) lldpStatsRemTablesInserts
(2) lldpStatsRemTablesDeletes
(3) lldpStatsRemTablesDrops
(4) lldpStatsRemTablesAgeouts
A notification generated by the local device sensing a
change in the topology that indicates that a new
remote device attached to a local port, or a remote
device disconnected or moved from one port to
another.
Binding:
(1) lldpRemChassisIdSubtype
(2) lldpRemChassisId
(3) lldpXMedRemDeviceClass
Description
The trap is sent when a MAC-based Access Control
host is successfully logged in.
Binding objects:
(1) ifIndex,
(2) dnaSessionClientMacAddress
(3) dnaSessionAuthVlan
The trap is sent when a MAC-based Access Control
host login fails.
1441
OID
1.3.6.1.2.1.10
.166.4.0.1
1.3.6.1.2.1.10
.166.4.0.2
1.3.6.1.2.1.10
.166.4.0.3
1.3.6.1.2.1.10
.166.4.0.4
OID
1.0.8802.1.1.
2.0.0.1
1.0.8802.1.1.
2.1.5.4795.0.
1
OID
1.3.6.1.4.1.17
1.14.153.0.1
1.3.6.1.4.1.17
1.14.153.0.2