D-Link DXS-3600 Series Cli Reference Manual page 1179

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
94-14 debug ipv6 rip packet-receiving
This command is used to turn on the IPv6 RIP packet receiving debug switch. To turn off the IPv6 RIP
packet receiving debug switch, use the no form of this command.
debug ipv6 rip packet-receiving
no debug ipv6 rip packet-receiving
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on or turn off the IPv6 RIP packet receiving debug switch. When one IPv6 RIP
protocol packet is received, the debug information will be print if the IPv6 RIP debug function is turned on.
Example
This example shows how to turn on the IPv6 RIP packet receiving debug switch.
Switch# debug ipv6 rip packet-receiving
Switch#
Received a RIPng request packet from FE80::1
94-15 debug ipv6 rip packet-transmitting
This command is used to turn on the IPv6 RIP packet transmitting debug switch. To turn off the IPv6 RIP
packet transmitting debug switch, use the no form of this command.
debug ipv6 rip packet-transmitting
no debug ipv6 rip packet-transmitting
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Privileged EXEC Mode.
Command Default Level
1174