System Log Commands - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
110.

System Log Commands

110-1 clear logging
This command is used to delete log messages in the system logging buffer.
clear logging
Parameters
None.
Default
None.
Command Mode
Privilege EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command deletes all the log messages in the system logging buffer.
Example
This example shows how to delete all the log messages in the logging buffer.
Switch# clear logging
Clear logging? (y/n) [n] y
Switch#
110-2 logging on
This command is used to enable the logging of system messages. Use the no command to disable the
logging of system messages.
logging on
no logging on
Parameters
None.
Default
By default, this feature is enabled.
Command Mode
Global Configuration Mode.
1292