Time Range Commands - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
112.

Time Range Commands

112-1 periodic
This command is used to specify the period of time for a time range profile. This command is used in the
time-range configuration mode.
periodic {daily HH:MM to HH:MM | weekly WEEKLY-DAY HH:MM to [WEEKLY-DAY] HH:MM}
no periodic {daily HH:MM to HH:MM | weekly WEEKLY-DAY HH:MM to [WEEKLY-DAY] HH:MM}
Parameters
daily HH:MM to HH:MM
weekly WEEK-DAY HH:MM to
[WEEK-DAY] HH:MM
Default
None.
Command Mode
Time-range Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
A new period can be partially overlapped with an older one. If a new period's starting and ending time is
respectively the same as a previous period, an error message will be displayed and the new period will
not be allowed. When specifying a period to remove, it must be the same period originally added and
cannot be a partial range of a period or multiple periods configured. Otherwise, an error message will be
displayed.
Example
This example shows how to create a time-range that include daily 09:00 to 12:00, 00:00 Saturday to
00:00 Monday and delete the period for daily 09:00 to 12:00.
Switch# configure terminal
Switch(config)# time-range rdtime
Switch(config-time-range)# periodic daily 9:00 to 12:00
Switch(config-time-range)# periodic weekly saturday 00:00 to monday 00:00
Switch(config-time-range)# no periodic daily 9:00 to 12:00
Switch(config-time-range)#
112-2 show time-range
This command is used to display the time range profile configuration.
Specifies the time of the day, using the format HH:MM (for example,
18:30).
Specifies the day of the week and the time of day in the format day
HH:MM, where the day of the week is spelled out (monday, tuesday,
wednesday, thursday, friday, saturday, and sunday). If the ending day
of the week is the same as the starting day of the week, it can be
omitted.
1310