D-Link DXS-3600 Series Cli Reference Manual page 1232

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the per port trap sending state.
Example
This example shows how to display the trap sending state for ports Ethernet 1/0/1 to 1/0/9.
Switch# show snmp-server trap-sending interface ethernet 1/0/1-1/0/9
Port
-------
eth1/0/1
eth1/0/2
eth1/0/3
eth1/0/4
eth1/0/5
eth1/0/6
eth1/0/7
eth1/0/8
eth1/0/9
Switch#
101-13 snmp-server
This command is used to enable the SNMP agent. Use the no command to disable the SNMP agent.
snmp-server
no snmp-server
Parameters
None.
Default
By default, this option is disabled.
Command Mode
(Optional) Specifies the interface ID. If no interface is specified, then all
ports will be displayed.
Trap Sending
-------------
Enabled
Enabled
Disabled
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
1227