D-Link DXS-3600 Series Cli Reference Manual page 1246

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
MEMBER-LIST
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command can be used on Commander Switch to upload files to the server from member switches. In
order to distinguish the different member switch's ID, the file name will be appended to the member
switch's ID.
Example
This example shows how to download firmware to the member switch 1.
Switch# copy sim tftp://10.10.10.58/switch.had firmware member 1
Download firmware 10.10.10.58/ switch.had to member 1 ?(y/n)[n] y
Download Status:
ID MAC Address
---------------------------------------
1 00-02-01-03-01-03 SUCCESS
Switch#
This example shows how to upload the system log from the member switch 1.
Switch# copy sim system-log tftp: //10.10.10.58/switchlog member 1
Upload system log
Upload Status
ID MAC Address
---------------------------------------
1 00-02-01-03-01-03 SUCCESS
Switch#
102-9 show sim
This command is used to display single IP management information.
is specified as the destination URL, the purpose is to download the
running configuration from the TFTP server to member switches.
When the firmware is specified as the destination URL, the purpose is
to download the firmware from the TFTP server to member switches.
The boot image on the member switches will be replaced by the
downloaded file.
(Optional) Specifies the member switch to download the file. Multiple
members can be specified at a time. Use ',' to separate multiple IDs, or
"-" to denote a range of interface IDs.
Status
from member 1 to 10.10.10.58/switchlog ?(y/n)[n]y
Status
1241