Ipv4 Interface (Ip Over Atm) - D-Link DVA-5582 User Manual

Section 3 - Configuration

IPv4 Interface (IP over ATM)

Select Yes to enable NAT (Network Address Translation) or No
Enable NAT:
to disable. NAT is a form of firewall and enabling it is strongly
recommended. The default is Yes.
IPv4 Address Enter your static IP address for IP over ATM. This information should
be provided by your ISP.
Subnet Mask: Enter the subnet mask for you IPv4 address here. This information
should be provided by your ISP.
Select Yes to set this connection as the default source for your
Setup as Default
Route: Internet connection. Selecting No will require manual connection
in advanced settings. The default setting is Yes.
Setup Static DNS Select No to get DNS information automatically from DHCP. Select
Servers: Yes to setup DNS manually, and you will be prompted for a preferred
and alternate server.
Preferred DNS Enter the IP address of your preferred DNS Server. This field only
Server: appears if Setup Static DNS Servers is set to Yes.
Alternate DNS
Enter the IP address of your alternate DNS server. This field only
Server appears if Setup Static DNS Servers is set to Yes.
Click Next to configure IPv6 Interface Settings on page 25.
Click Cancel to return to the homescreen, or Back to return to the previous screen.
D-Link DVA-5582 User Manual
DNS Configuration
23