D-Link DXS-3600 Series Cli Reference Manual page 1193

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
rsa
dsa
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command deletes the public key pair of the SSH Server. If both RSA and DSA key pairs are deleted,
the SSH server will not be in service.
Example
This example shows how to delete the RSA key.
Switch# crypto key zeroize rsa
Do you really want to remove the key? (y/n)[n]: y
Switch#
97-3 ip ssh timeout
This command is used to configure the SSH control parameters on the switch. To restore the default
values, use the no form of this command.
ip ssh {timeout SECONDS | authentication-retries NUMBER}
no ip ssh {timeout | authentication-retries}
Parameters
timeout SECONDS
authentication-retries
NUMBER
Default
By default, the timeout value is 120 seconds.
By default, the authentication retries is 3.
Command Mode
Global Configuration Mode.
Command Default Level
Specifies to delete the RSA key pair.
Specifies to delete the DSA key pair.
Specifies the time interval that the switch waits for the SSH client to
respond during the SSH negotiation phase The range is from 30 to
600.
Specifies the number of authentication retry attempts. The session is
closed if all the attempts fail. The range is from 1 to 32.
1188