D-Link DXS-3600 Series Cli Reference Manual page 1113

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch# show mls qos interface ethernet 1/0/1-2 map dscp-color
eth1/0/1
DSCP 0–7 are mapped to green
DSCP 8–40 are mapped to red
DSCP 41-43 are mapped to yellow
eth1/0/2
DSCP 0 – 7 are mapped to green
Switch#
This example shows how to display the CoS to color map for port 1/0/3 to port 1/0/4.
Switch# show mls qos interface ethernet 1/0/3-4 map cos-color
eth1/0/3
CoS 0,1,2 are mapped to green
CoS 3-4 are mapped to yellow
CoS 6 are mapped to red
eth1/0/4
CoS 0,1-6 are mapped to green
Switch#
This example shows how to display the DSCP to CoS map for port 1/0/1.
Switch# show mls qos interface ethernet 1/0/1 map dscp-cos
eth1/0/1
0 1 2 3
--------------------------------
00 00 00 00 00 00 00 00 00 01 01
10 01 01 01 01 01 01 02 02 02 02
20 02 02 02 02 03 03 03 03 03 01
30 03 03 04 04 04 04 04 04 04 04
40 05 05 05 05 05 05 05 05 06 06
50 06 06 06 06 06 06 07 07 07 07
60 07 07 07 07
Switch#
87-25 show mls qos map dscp-mutation
This command is used to display the QoS DSCP mutation map configuration.
show mls qos map dscp-mutation [MAP-NAME]
Parameters
MAP-NAME
4 5 6 7 8 9
(Optional) Specifies the name of the DSCP mutation map to be
displayed.
1108