DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
VLAN mode
Native VLAN
Hybrid untagged VLAN
Hybrid tagged VLAN
Ingress checking
Acceptable frame type
Dynamic tagged VLAN
VLAN Precedence
eth1/0/4
VLAN mode
Access VLAN
Hybrid untagged VLAN
Ingress checking
Acceptable frame type
VLAN Precedence
Switch#
This example shows how to display all the MAC–based VLAN entries.
Switch# show vlan mac-vlan
MAC Address
------------------
00-80-cc-00-00-11
00-11-22-00-00-05
Total Entries: 2
Switch#
This example shows how to display all the subnet–based VLAN entries.
Switch# show vlan subnet-vlan
Subnet
------------------------
20.0.0.0/8
192.0.0.0/8
3FFE:22:33:44::/64
Total Entries: 3
Switch#
116-9
switchport access vlan
This command is used to specify the access VLAN for an interface. Use the no form of the command to
reset to the default setting.
switchport access vlan VLAN-ID
: Hybrid
: 5
: 2,4,5,6
: 8,9,10
: Enabled
: Admit-All
:
: MAC-VLAN
: Dot1q-tunnel
: 800
: 200, 600
: Enabled
: Admit-all
: MAC-VLAN
VLAN ID
Priority
Status
--------
--------
101
4
200
5
VLAN ID
Priority
-------
---------
100
0
100
4
100
0
1339
----------
Active
Active