D-Link DXS-3600 Series Cli Reference Manual page 1109

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch(config-pmap)#
87-22 show class-map
This command is used to display the class map configuration.
show class-map [NAME]
Parameters
NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display all class maps and their matching criteria.
Example
This example shows how two class maps are defined. Packets that match the access list "acl_home_user"
belong to the class "c3", IP packets belong to the class "c2".
Switch# show class-map
Class Map match-any class-default
Match any
Class Map match-all c2
Match protocol ip
Class Map match-all c3
Match access-group acl_home_user
Switch#
87-23 show mls qos aggregate-policer
This command is used to display the configured aggregated policer.
show mls qos aggregate-policer [NAME]
Parameters
(Optional) Specifies the name of the class map. The class map name
can be a maximum of 32 alphanumeric characters.
1104