D-Link DXS-3600 Series Cli Reference Manual page 1432

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Log Message: OSPF-5-NBRFULLTODOWN: OSPF nbr <nbr-id> on interface <intf-
name> changed state from Full to Down
Parameters description:
intf-name: Name of OSPF interface.
nbr-id: Neighbor's router ID.
Event description: One OSPF neighbor state's dead timer expired.
Log Message: OSPF-5-DTIMEXPIRED: OSPF nbr <nbr-id> on interface <intf-
name> dead timer expired
Parameters description:
intf-name: Name of OSPF interface.
nbr-id: Neighbor's router ID.
Event description: One OSPF virtual neighbor state changed from Loading to Full.
Log Message: OSPF-5-VNBRLOADINGTOFULL: OSPF nbr <nbr-id> on virtual link
changed state from Loading to Full
Parameters description:
nbr-id: Neighbor's router ID.
Event description: One OSPF virtual neighbor state changed from Full to Down.
Log Message: OSPF-5-VNBRFULLTODOWN: OSPF nbr <nbr-id> on virtual link
changed state from Full to Down
Parameters description:
nbr-id: Neighbor's router ID.
Event description: OSPF router ID was changed.
Log Message: OSPF-6-RIDCHANGE: OSPF router ID changed to <router-id>
Parameters description:
router-id: OSPF router ID.
Event description: Enable OSPF.
Log Message: OSPF-6-STATECHANGE: OSPF state changed to [Enabled |
Disabled]
Peripheral
Log Description
Event description: Fan Recovered.
Log Message: Unit <id>, <fan-descr> back to normal.
Parameters description:
Unit <id>: The unit ID.
fan-descr: The FAN ID and position.
Event description: Fan Fail
Log Message: Unit <id> <fan-descr> failed
Parameters description:
Unit <id>: The unit ID.
fan-descr: The FAN ID and position.
Event description: Temperature sensor enters alarm state.
Log Message: Unit <unit-id> <thermal-sensor-descr> detects abnormal
temperature <degree>
Parameters description:
unitID: The unit ID.
1427
Notice
Notice
Notice
Informational
Informational
Severity
Critical
Critical
Critical