D-Link DXS-3600 Series Cli Reference Manual page 1195

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to specify the service port for SSH. Use the no command to return the service port
to 23.
ip ssh service-port TCP-PORT
no ip ssh service-port
Parameters
TCP-PORT
Default
By default, this value is 22.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command configures the TCP port number for SSH server.
Example
This example shows how to change the service port number to 3000.
Switch# configure terminal
Switch(config)# ip ssh service-port 3000
Switch(config)#
97-6 show crypto key mypubkey
This command is used to display the RSA or DSA public key pairs.
show crypto key mypubkey {rsa | dsa}
Parameters
rsa
dsa
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Specifies the TCP port number. TCP ports are numbered between 1
and 65535. The "well-known" TCP port for the SSH protocol is 22.
Specifies to display information regarding the RSA public key.
Specifies to display information regarding the DSA public key.
1190