D-Link DXS-3600 Series Cli Reference Manual page 1123

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
CNPV-PRIORITY-VALUE
admin-defense-mode
alternate-priority PRIORITY-
VALUE
defense-mode-choice
Default
None.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use the global qcn cnpv command to assign the priority value as a CNPV first. When you issue the
command in the interface configuration mode and specify a priority which has not been globally assigned
as a CNPV an error message will be prompted. The interface CNPV configuration has higher precedence
than global CNPV configuration. That means the modification of the interface CNPV configuration
overrides the global CNPV configuration.
The rule to determine the defense mode and alternate priority for a CNPV is specified in the following
table.
defense-mode-
choice (interface)
admin
auto
Specifies the IEEE 802.1p priority value to be the Congestion
Notification Priority Value (CNPV). The valid priority range of CNPV is
from 0 to 7.
Specifies the CND defense mode for this CNPV on the interface.
disable - The congestion notification capability is administratively
disabled for this priority.
interior - The priority parameter of frame input are not remapped to or
from this priority and the frames are transmitted without a CN-TAG.
interior-ready - The priority parameter of frame input are not
remapped to or from this priority and the CN-TAGs won't be stripped
off when transmitting the frames.
edge - The priority parameter of frame input at this priority are
remapped to an alternate value. Frames at other priorities are not
remapped to this priority and the frames are transmitted without a CN-
TAG.
If not specified, the default defense mode is disable.
Specifies a priority value to which this priority value is to be remapped
when the receiving frame with a Dot1p priority is equal to the specified
CNPV at the edge port. The valid priority range is from 0 to 7.
If not specified, the default alternate priority is 0.
Specifies how the default CND defense mode and alternate priority for
this Congestion Notification Priority Value on this interface.
admin - The default CND defense mode and alternate priority are
specified by administrator.
auto - The default CND defense mode and alternate priority are
controlled automatically.
comp - The default CND defense mode and alternate priority are
determined by global setting.
If not specified, the default defense mode choice is comp.
defense-mode- Defense mode
choice (global) selected by
any admin-defense-mode
(interface)
any Controlled by the LLDP
1118
Alternate priority is
selected by
alternate-priority
(interface)
Controlled automatically (*).