D-Link DXS-3600 Series Cli Reference Manual page 1082

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Class Map my_class_map_3
match cos 5
Switch#
86-9 show mls qos queuing interface
This command is used to display the weight configuration for different scheduler algorithms on specified
interface(s).
show mls qos queuing interface INTERFACE-ID [,|-]
Parameters
INTERFACE-ID
,
-
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the bandwidth assignment for all scheduling modes.
Example
This example shows how to display the queuing information on interface Ethernet 1/0/1.
Switch# show mls qos queuing interface ethernet 1/0/1
wrr bandwidth weights:
QID Weights
--- -------
0
1
2
3
4
5
6
7
wdrr bandwidth weights:
QID Quantums
Specifies the interface ID to display.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and after
the comma.
(Optional) Specifies a range of interfaces. No space is allowed before
and after the hyphen.
1
2
3
4
5
6
7
8
1077