D-Link DXS-3600 Series Cli Reference Manual page 1247

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
show sim [{candidates [CANDIDATE-ID] | members [MEMBER-ID] | group [COMMANDER-MAC] |
neighbor}]
Parameters
candidates
CANDIDATE-ID
members
MEMBER-ID
group
COMMANDER-MAC
neighbor
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display single IP management information.
Example
This example shows how to display detailed local SIM information on the Commander.
Switch# show sim
Group Name
SIM Version
Firmware Version
Management VLAN
Device Name
MAC Address
Platform
SIM State
Role State
Discovery Interval : 60 sec
Hold Time
Switch#
This example shows how to display detailed local SIM information on the Member switch.
Switch# show sim
SIM Version
Firmware Version
Device Name
MAC Address
Specifies to display the information of Candidate switches.
Specifies to display detailed information of a Candidate.
Specifies to display the information of Member switches.
Specifies to display detailed information of a Member.
Specifies to display the information of other SIM Groups.
Specifies to display detailed information of a Group.
Specifies to display the neighbor information.
: my-group
: VER-1.61
: 2.40.041
: 100
:
: 00-02-01-03-01-03
: DXS-3600
: Enabled
: Commander
: 120 sec
: VER-1.61
: 2.40.041
:
: EE-FF-00-00-12-12
1242