D-Link DXS-3600 Series Cli Reference Manual page 1213

Layer 2/3 managed 10gigabit
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Display Parameters
sFlow Agent Version
sFlow Agent Address
sFlow Agent IPv6 Address
Index
Owner
Expire Time
Current Countdown Time
Max Datagram Size
Address
VRF Name
Port
Datagram Version
Interface
Instance
Receiver
Mode
Admin Rate
Active Rate
Max Header Size
Interface
Instance
Receiver
Interval
Indicates the MIB version, organization and software revision.
The IPv4 address of the sFlow agent.
The IPv6 address of the sFlow agent.
The index into Receivers.
The owner name.
The expiry time configured by user.
The time (in seconds) remaining before stop of sampling and polling.
The maximum number of data bytes of a single sFlow datagram.
The IPv4/IPv6 address of the remote sFlow receiver.
The name of the routing forwarding instance.
The UDP port of the remote sFlow receiver.
The version of sFlow datagrams.
The interface on which the sampler is configured.
The Sampler instance index.
The Receiver's INDEX for this Sampler.
The instance's mode which is inbound, or outbound, or inactive.
The rate for packet sampling configured by user.
The active rate for packet sampling set to chip.
The maximum number of bytes that should be copied from sampled
packets.
The interface on which the poller is configured.
The Poller instance index
The Receiver's INDEX for this Poller.
The maximum number of seconds between successive polling.
1208

Advertisement

Table of Contents
loading

Table of Contents