Quantized Congestion Notification (Qcn) Commands - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
88. Quantized Congestion Notification (QCN)
Commands
88-1 clear qcn counters
This command is used to clear QCN counters.
clear qcn counters {all | interface INTERFACE-ID [, | -] cp QID [, | -]}
Parameters
all
interface INTERFACE-ID [, | -]
cp QID [, | -]
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command with the interface keyword to clear QCN counters of CP(s) on the specified interface(s).
Example
This example shows how to reset QCN counters on all interfaces.
Switch# clear qcn counters all
Switch#
88-2 qcn
This command is used to enable the QCN functionality. Use the no form of this command to disable the
QCN functionality
qcn enable
no qcn enable
Parameters
None.
Specifies to clear QCN counters on all interfaces.
Specifies the interface to clear QCN counters. Specify multiple
interfaces, separated by commas or ranges by using a hyphen. No
space before and after the comma or hyphen.
Specifies the queue ID (same as the outbound queue ID) to specify
which Congestion Point (CP) to clear counters. Specify multiple CPs,
separated by commas or ranges by using a hyphen. No space before
and after the comma or hyphen.
1114