D-Link DXS-3600 Series Cli Reference Manual page 1428

Layer 2/3 managed 10gigabit
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Event description: SSH session timed out.
Log Message: SSH session timed out (Username: <username>, IP: <ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Event description: Logout through SSH.
Log Message: Logout through SSH (Username: <username>, IP: <ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
MAC
Log Description
Event description: the host has passed MAC authentication
Log Message: MAC-based Access Control host login success (MAC: <mac-
address>, <interface-id>, VID: <vlan-id>)
Parameters description:
mac-address: the host MAC addresses.
interface-id: the interface on which the host is authenticated.
vlan-id: the VLAN ID on which the host exists.
Event description: the host has aged out.
Log Message: MAC-based Access Control host aged out (MAC: <mac-address>,
<interface-id>, VID: <vlan-id>)
Parameters description:
mac-address: the host MAC addresses.
interface-id: the interface on which the host is authenticated.
vlan-id: the VLAN ID on which the host exists.
Event description: the host failed to pass the authentication.
Log Message: MAC-based Access Control host login fail (MAC <macaddress>,
<interface-id>, VID: <vlan-id>).
Parameters description:
mac-address: the host MAC addresses.
interface-id: the interface on which the host is authenticated.
vlan-id: the VLAN ID on which the host exists.
Event description: the authorized user number on the whole device has reached
the maximum user limit.
Log Message: MAC-based Access Control enters stop learning state..
Event description: the authorized user number on the whole device is below the
maximum user limit in a time interval.
Log Message: MAC-based Access Control recovers from stop learning state.
Event description: the authorized user number on an interface has reached the
maximum user limit.
Log Message: <interface-id> enters MAC-based Access Control stop learning state
1423
Informational
Informational
Severity
Informational
Informational
Critical
Warning
Warning
Warning

Advertisement

Table of Contents
loading

Table of Contents