Show Boot - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to specify the interface whose IP address will be used as the source address for
initiating RCP packets. To do software loading via the out of band management port, specify the interface
ID for the out of band management port.
Example
This example shows how to do software download via the out of band management port.
Switch# configure terminal
Switch(config)# ip rcp source-interface mgmt0
Switch(config)#
109-10

show boot

This command is used to display the boot configuration file and the boot image setting.
show boot [unit UNIT-ID]
Parameters
UNIT-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the boot configuration file and the boot image setting.
Example
This example shows how to display system boot information.
Switch# show boot
Unit 1
Boot image: c:/bootimage.had
Boot config: c:/def_usr.cfg
Unit 2
Boot image: c:/bootimage.had
Boot config: c:/def_usr.cfg
Switch#
(Optional) Specifies the unit to be displayed.
1288