DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
95-5 show cpu-protect safeguard
This command is used to display the settings and status of the Safeguard Engine.
show cpu-protect safeguard
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the settings and status of the Safeguard Engine.
Example
This example shows how to display the settings and current status of the Safeguard Engine.
Switch# show cpu-protect safeguard
Safeguard Engine State
Safeguard Engine Status
Utilization Thresholds:
Rising
Falling
Switch#
Display Parameters
Safeguard Engine Status
95-6 show cpu-protect sub-interface
This command is used to display the rate limit and statistics by sub-interface.
: Disabled
: Normal
: 50%
: 20%
Displays the current mode that CPU utilization stays. The possible
displayed strings are:
Exhausted: If the CPU utilization is higher than the configured rising
threshold, it will enter Exhausted Mode and Safeguard Engine will take
actions. The Safeguard Engine mechanism ceases till the utilization is
lower than the falling threshold.
Normal: The Safeguard Engine is not triggered to take actions.
1180