D-Link DXS-3600 Series Cli Reference Manual page 1190

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
SECONDS
Default
The default idle timer for SFTP sessions is 120 seconds.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to specify the idle timer for the SFTP server. The new setting will be applied to
SFTP sessions established afterwards, the current connected SFTP sessions won't be affected. The
cancel of an idle SFTP session takes no effect to the corresponding SSH Shell session. After all SSH
sessions (SFTP session and Shell session) of a connection closed, the SSH connection will be closed.
Example
This example shows how to specify the idle timer for the SFTP server to 600 seconds.
Switch# configure terminal
Switch(config)# ip sftp timeout 600
Switch(config)#
96-3 show ip sftp
This command is used to display the SFTP server settings.
show ip sftp
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the SFTP server settings.
Example
This example shows how to display the global settings of the SFTP server.
Switch# show ip sftp
Specifies the idle timer for the SFTP server. If the SFTP server detects
no operation after the duration of idle timer for a specific SFTP
session, the switch will close this SFTP session. The range is from 30
to 600 seconds.
1185