D-Link DXS-3600 Series Cli Reference Manual page 1399

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
web-auth success redirect-path STRING
no web-auth success redirect-path
Parameters
STRING
Default
By default, the Web authentication logout page is displayed.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to specify the Web page to display to the hosts who passes the Web authentication.
Example
This example shows how to configure the default redirect path to be "http://www.website.com" after
passing Web authentication.
Switch# configure terminal
Switch(config)# web-auth success redirect-path http://www.website.com
Switch(config)#
121-4 web-auth system-auth-control
This command is used to enable the Web authentication function globally on the switch. Use the no form
of this command to disable the Web authentication function globally on the switch.
web-auth system-auth-control
no web-auth system-auth-control
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Specifies the default URL the client Web browser will be redirected to
after successful authentication. If no default redirect URL is specified,
the Web authentication logout page will be displayed. The default
redirect path can be up to 128 characters.
1394