D-Link DXS-3600 Series Cli Reference Manual page 1071

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
P
10.110.0.0/8
[160/5]
via 10.119.254.6
0DT0H1M
Vlan2
85-11 show ip route summary
This command is used to display the brief information for the working routing entries.
show ip route summary [vrf VRF-NAME]
Parameters
vrf VRF-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the brief information for the working routing entries.
Example
This example shows how to display the brief information for the working routing entries.
Switch# show ip route summary
Route Source
Connected
Static
RIP
OSPF
BGP
ISIS
Total
Multi-path
Switch#
The stale route during restarting of protocols.
Indicates the network.
The first number is the administrative distance of the protocol source;
the second number is the metric for the route.
Specifies the next hop to the network.
Specifies the time since last update in [n]DT[n]H[n]M[n]S.
Specifies the interface through which the specified network can be
reached.
(Optional) Specifies to display the VRF routing table.
Networks
1
0
0
0
0
0
1
0
1066