D-Link DXS-3600 Series Cli Reference Manual page 1273

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
snmp-server enable traps storm-control [storm-occur] [storm-clear]
no snmp-server enable traps storm-control [storm-occur] [storm-clear]
Parameters
storm-occur
storm-clear
Default
By default, this feature is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
None.
Example
This example shows how to enable the sending of traps for storm control for both storm occurrences and
clearances.
Switch# configure terminal
Switch(config)# snmp-server enable traps storm-control
Switch(config)#
(Optional) Specifies to send a notification when a storm event is
detected.
(Optional) Specifies to send a notification when a storm event is
cleared.
1268