Show Ip Protocols - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
count: 2
Seq 5 permit 10.20.0.0/16
Seq 10 permit 20 10.50.0.0/16 le 24
Total Entries: 1
Switch#

85-9 show ip protocols

This command is used to display the state of the routing process.
show ip protocols [rip | ospf | bgp | isis] [vrf VRF-NAME]
Parameters
rip
ospf
bgp
isis
vrf VRF-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the status of the routing processes. If no option is specified, all running
routing processes are displayed.
Example
This example shows how to display the routing protocol information.
Switch# show ip protocols
Routing Protocol is RIP
Sending updates every 5 seconds, next due in 5 seconds
Invalid 180 secs,
Default redistribution metric is 0
Redistributing : OSPF,static,connected,BGP,
Default version control: send version 1, receive any version
Interface
vlan10
vlan20
vlan40
vlan70
(Optional) Specifies to display the RIP protocol overall configuration.
(Optional) Specifies to display the OSPF protocol overall configuration.
(Optional) Specifies to display the BGP protocol overall configuration.
(Optional) Specifies to display the IS-IS protocol overall configuration.
(Optional) Specifies to display the VRF routing process.
flush 120 secs
Send Recv
1 1 2
1 1 2
1 1 2
1 1 2
1062