Table of Contents
Advertisement
Getting Started: Communication between a CPU 416-2 PCI and an S7-400
7.6
Step 4: Hardware Configuration of the Box PC 840
Selecting the Rack
1. Select the Box PC 840.
2. Double-click on Configuration to open HW Config.
3. Open the catalog and navigate to SIMATIC PC Station > Controller > CPU
416-2 PCI > 6ES7 616-2QL10-0AB4 > V4.0
4. Use a drag-and-drop operation to insert the CPU 416-2 PCI onto Slot 3.
Slot 3 corresponds to Index 3 in the Station Configuration Editor. The slot and
the index must always be the same!
Result: the Properties - PROFIBUS Interfaces DP Master dialog is displayed.
5. Do not link the subnet for the DP master.
6. Click OK.
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
93
Advertisement
Table of Contents
