Gestetner B147 Service Manual page 1063

Tech Service Bulletin No. B147/B149/B190 – 022
NOTES: Before proceeding to the next step,
Make sure to attach the charge roller as shown below, i.e. parts B and D should both fit into their
respective guide ribs on the unit frame.
Make sure that:
1) the spring is properly aligned (straight; not bent),
2) the gears on both sides are attached properly to the shaft, and
3) the charge roller cleaner is properly secured in its bushings at both ends.
14. Holding the drum by both ends as shown, reattach the gear-end first by sliding the drum in the direction
shown and then mounting the gear in the frame hole.
15. Bring down the unattached end
attachment.
, and then slide the drum in the direction shown
Set the drum gear in the
frame hole.
to complete the
Page 6 of 7