Gestetner B147 Service Manual page 1056

Tech Service Bulletin No. B147/B149/B190 – 021
9. Remove the screw [F] from the ID sensor assembly.
10. Attach the Guide Plate Bracket using the screw
provided in the kit. (M3x5 screw x 1 [H]).
11. Make sure there is no clearance between the
bracket and ID sensor assembly core.
12. Reassemble the ID sensor assembly, and replace all
the parts removed in the previous steps.
[F]
[G]
[H]
Check Clearance
Page 3 of 4