Gestetner B147 Service Manual page 1061

Tech Service Bulletin No. B147/B149/B190 – 022
7. Remove the charge roller from the frame along with plastic components B, C, and D shown below, being
sure to touch only the tape-covered rubber edges of the roller (see photo in Step 9 below).
NOTE: Do not touch the cleaning blade or exposed rubber surfaces of the charge roller.
8. Place the charge roller on the cloth-covered surface just as in Step 5, with smaller cloths or sponge
sheets under both edges as shown.
9. Remove parts B, C and D as shown while holding the charge roller by its taped edges.
B
C
Tape-covered areas.
Do not remove this tape.
D
Page 4 of 7