Gestetner B147 Service Manual page 1069

Firmware History for B147/B149/B190
Corrects the following:
•
The counter on a meter charge device installed mistakenly increments twice when all of
the following conditions are met:
A meter charge device (e.g. key-card, coin-lock, key-counter) is installed
-
- The 2-tray paper supply unit is installed
- SP5-121 is set to "Paper Feed"
- A paper misfeed occurs in tray 4
NOTE: This error occurs only on the external meter charge device. The mainframe meter
click counter increments correctly.
Corrects the following:
•
Default fusing temperature changed on NA machines for the following modes in order to
increase the glossiness on the second side of a duplex sheet.
1105 6 H:N [K] D 125
1105 11 H:N[FC] D 125
1105 17 P:N [K] D 125
1105 22 P:N[FC] D 125
Corrects the following:
•
SC670 misdetection.
Corrects the following:
•
Modified as part of solution for cold offset at power on under cold conditions.
•
Modified in conjunction with PCU cleaning blade modification to ensure the blade remains
properly fixed in place.
•
Finisher jam with series printing if the stapling positions for the 1st and 2nd jobs are
different and the 1st job is set for stapling under unsupported conditions (e.g. only one
sheet in stack).
•
SC545/555 misdetection (EU).
Corrects the following:
•
The display values for SP7-803-46 and SP7-906-34 were wrong ("oil unit lifetime
1000%"). Also, the calculation for oil unit lifetime was improved.
•
Modified software to get Energy Star certification in Taiwan.
Corrects the following:
•
Added the serial number information for the Korea model.
⇒
Corrects the following:
•
The detection timing for SC471 was optimized.
Corrects the following:
•
Added fusing control data for the China model.
SYMPTOM CORRECTED
*BCU
[ 100 to 190 / NA: 170, EU: 165 / 5°C/step]
*BCU
[ 100 to 190 / NA: 170, EU: 170 / 5°C/step]
*BCU
[ 0 to 190 / NA: 150, EU: 145 / 5°C/step]
*BCU
[ 0 to 190 / NA: 150, EU: 150 / 5°C/step]
CARD
VERSION
1.09B
1.09C
1.09D
1.11
1.13
1.14
1.14A
1.16
Page 3 of 15