Gestetner B147 Service Manual page 1065

SCANNER SP MODE
2-022 [ACS settings]
2-022-1 Color judge rate
This menu specifies the area ratio that is checked by the auto-color sensing feature.
2-022-2 Color gap Notch No.1
2-022-3 Color gap Notch No.2
2-022-4 Color gap Notch No.3
2-022-5 Color gap Notch No.4
2-022-6 Color gap Notch No.5
This program specifies the color difference for each image density level.
⇒
2-022-7 Adjustment value of threshold
NOTE: Requires System firmware v1.21
or newer.
This menu specifies the threshold of the auto-color sensing feature.
B147/B149/B190
* [ 1 to 100 / 1 / 1 %/step ]
CTL
* [ 0 to 255 / 30 / 1 /step ]
CTL
* [ 0 to 255 / 28 / 1 /step ]
CTL
* [ 0 to 255 / 25 / 1 /step ]
CTL
* [ 0 to 255 / 22 / 1 /step ]
CTL
* [ 0 to 255 / 10 / 1 /step ]
CTL
* [ -127 to 127 / -110 / 1 /step ]
CTL
5-136
Rev. 01/2005
SM