Toner Supply Motor - Ricoh B064 Service Manual

DEVELOPMENT UNIT

3.7.6 TONER SUPPLY MOTOR

[A]
[B]
B064R350.WMF
Open the front door.
Swing the toner unit out of the machine and remove the toner bottle.
[A]: Bracket (! x1)
[B]: Lock plate (! x1)
[C]: Toner bottle unit (" x1, harness x1, # x1)
• The c-clamp is under the toner unit.
• Lift the toner bottle unit off the pegs and lay it on a piece of newspaper to
avoid toner spill.
[D]: Bottom plate (! x3, harnesses x2)
• 2 screws on the bottom, 1 screw on the side.
[E]: Toner supply motor bracket (! x2)
[F]: Toner supply motor (! x2)
NOTE: After re-installation the tab [G] should be behind the stay and its pin
below should be in the open track below.
B064/B065
[G]
[F]
[E]
3-50
[C]
B064R311.WMF
[D]
SM