Undo Exec - Ricoh B064 SERIES Service Manual

Important!
• After an SD card has been copied, it can no longer be used. However, it must be
stored in the machine to serve as proof of purchase by the customer.
• The original card can also be used to perform an undo procedure (SP 5873 002).
• Before you store an SD card, label it carefully so it can be identified easily if you
need to do the undo procedure (see below).

Undo Exec

Do this procedure if you moved an option from the original SD card to another card
by mistake and you need to restore the original SD card.
1. Turn the main switch OFF.
2. Put the SD cards into the SD card slots as follows:
SD Card
Source (with copied appli.)
Target (now blank)
3. Turn the main switch ON.
4. Do SP5873-002 (Undo Exec).
5. Follow the instructions of the operation panel messages.
6. Turn the main switch OFF.
7. Remove the Source SD card (from C1 of B140 Series, C2 of B246/D052
Series).
8. Remove the option Target SD card from C3.
9. Insert restored SD card (the target) into the SD card slot.
B140 Series
B246/D052 Series
10. Turn the main switch ON.
11. Do SP5990-005 (Loading Program) and make sure the program runs correctly.
12. Turn the main switch OFF.
13. Remove the SD card.
SM
CÓPIA NÃO CONTROLADA
MFP OPTIONS: B140/B246/D052 SERIES
B140 Series
C1
C3
C1
C2
1-157
CÓPIA NÃO CONTROLADA
B246/D052 Series
C2
C3
B064 Series/B140 Series
/B246 Series/D052 Series