KEY CARD BRACKET (B498), KEY COUNTER BRACKET (B452)
Install the Key Card Bracket and Assembled Key Counter
WARNING!
Always turn the machine off and disconnect the machine power cord
before you do this procedure.
1. Remove the cover [A] ( x2).
2. Remove the right upper cover [B] ( x2).
3. Remove the three caps [C].
4. Attach the stud [D].
5. Put the keyholes [E] of the key card table [F] over the heads of the shoulder
screws, as shown above. Then tighten the screws to attach the table (M4 x 14,
x2).
B132/B200
[D]
[B]
[C]
[A]
B498I002.WMF
1-50
[E]
[F]
B498I003.WMF
SM