Grandstream Networks UCM6510 User Manual page 91

Address
Port
Base DN
User Name
Password
Number Filter
Name Filter
Version
Name A ttribute
Number A ttribute
Display Name
Max Hits
Search Timeout
Sort Results
Incoming Calls
Outgoing Calls
Firmware Version 1.0.2.5
Configure the IP address or DNS name of the LDAP server.
Configure the LDAP server port. The default value is 389.
This is the location in the directory where the search is requested to begin.
Example:
dc=grandstream, dc=com
•
ou=Boston, dc=grandstream, dc=com
•
Configure the bind "Username" for querying LDAP servers. The field can
be left blank if the LDAP server allows anonymous binds.
Configure the bind "Password" for querying LDAP servers. The field can
be left blank if the LDAP server allows anonymous binds.
Configure the filter used for number lookups. Please refer to user manual
for more details.
Configure the filter used for name lookups. Please refer to user manual for
more details.
Select the protocol version for the phone to send the bind requests. The
default value is 3.
Specify the "name" attributes of each record which are returned in the
LDAP search result. Example:
gn
•
cn sn description
•
Specify the "number" attributes of each record which are returned in the
LDAP search result. Example:
telephoneNumber
•
telephoneNumber Mobile
•
Configure the entry information to be shown on phone's LCD. Up to 3
fields can be displayed. Example:
%cn %sn %telephoneNumber
•
Specify the maximum number of results to be returned by the LDAP
server. Valid range is 1 to 3000. The default value is 50.
Specify the interval (in seconds) for the server to process the request and
client waits for server to return. Valid range is 0 to 180. The default value is
30.
Specify whether the searching result is sorted or not. The default setting is
No.
Configure to enable LDAP number searching when receiving calls. The
default setting is No.
Configure to enable LDAP number searching when making calls. The
default setting is No.
UCM6510 IP PBX User Manual Page 90 of 317