Invite Other Parties To Join Conference; Figure 100: Conference Invitation From Web Gui - Grandstream Networks UCM6510 User Manual

Users could dial the conference bridge extension to join the conference. If password is required, enter the
password to join the conference as a normal user, or enter the admin password to join the conference as
administrator.
INVITE O THER P ARTIES T O J OIN C ONFERENCE
When using the UCM6510 conference bridge, there are two ways to invite other parties to join the
conference.
Invite from web GUI
•
For each conference bridge in UCM6510 web GUI-­>PBX-­>Call Features-­>Conference, there is an icon
for option "Invite a participant". Click on it and enter the number of the party you would like to invite.
Then click on "Add". A call will be sent to this number to join it into the conference.
Invite by dialing 0 or 1 during conference call
•
A conference participant can invite other parties to the conference by dialing from the phone during the
conference call. Please make sure option "Enable User Invite" is turned on for the conference bridge
first. Enter 0 or 1 during the conference call. Follow the voice prompt to input the number of the party
you would like to invite. A call will be sent to this number to join it into the conference.
0: If 0 is entered to invite other party, once the invited party picks up the invitation call, a permission will
be asked to "accept" or "reject" the invitation before joining the conference.
1: If 1 is entered to invite other party, no permission will be required from the invited party.
-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­-­
Note:
Firmware Version 1.0.2.5
Figure 100: Conference Invitation From web GUI
UCM6510 IP PBX User Manual Page 190 of 317