Grandstream Networks UCM6510 User Manual page 286

2. Modify Admin Password
Figure 158: System Events-­>Alert Events Lists: Modify Admin Password
Detect Cycle: The UCM6510 will initiate the admin password check based on this cycle. Users
•
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
3. Memory Usage
Detect Cycle: The UCM6510 will perform the memory usage detection based on this cycle. Users
•
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6510
•
system will send the alert.
4. System Reboot
Detect Cycle: The UCM6510 will check the system reboot based on this cycle. Users can enter
•
the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
5. System Update
Firmware Version 1.0.2.5
Figure 159: System Events-­>Alert Events Lists: Memory Usage
Figure 160: System Events-­>Alert Events Lists: System Reboot
UCM6510 IP PBX User Manual Page 285 of 317