Sender
The following figure shows a sample Email settings on the UCM6510, assuming the Email is using
smtp.gmail.com as the SMTP server and the port number is 465.
Once the configuration is finished, click on "Save" first. Then click on "Test" button to make sure the Email
setting is working.
The following figure shows the new dialog prompted to test the Email setting. Fill in a valid Email address
to send a test Email to verify the Email settings on the UCM6510.
Firmware Version 1.0.2.5
Specify the sender's Email address.
For example, pbx@example.mycompany.com.
Figure 42: UCM6510 Email Settings
Figure 43: UCM6510 Email Settings: Send Test Email
UCM6510 IP PBX User Manual
Page 71 of 317