Table 23: Global Policy Parameters - Localization; Figure 58: Global Policy Categories - Grandstream Networks UCM6510 User Manual

Contact List: configure LDAP and XML phonebook download.
•
Maintenance: configure upgrading, web access, Telnet/SSH access and syslog.
•
Network Settings: configure IP address, QoS and STUN settings.
•
Customization: customize LCD screen wallpaper for the supported models.
•
Select the checkbox on the left of the parameter you would like to configure to active the dropdown list for
this parameter.
The following tables list the Global Policy configuration parameters for the SIP end device.
Language settings
Language
Date and Time
Date Format
Time Format
NTP Server
Time Zone
Firmware Version 1.0.2.5
Figure 58: Global Policy Categories
Table 23: Global Policy Parameters – Localization
Select the LCD display language on the SIP end device.
Configure the date display format on the SIP end device's LCD.
Configure the time display in 12-­hour or 24-­hour format on the SIP end
device's LCD.
Configure the URL or IP address of the NTP server. The SIP end device
may obtain the date and time from the server.
Configure the time zone used on the SIP end device.
UCM6510 IP PBX User Manual Page 88 of 317