Paging and Intercom Group can be used to make an announcement over the speaker on a group of
phones. Targeted phones will not ring but answer immediately using speaker. The UCM6510 paging and
intercom can be used via feature code to a single extension or a paging/intercom group. This sections
describes
the
configuration
Features->Paging/Intercom.
CONFIGURE
P AGING/INTERCOM
G ROUP
Click on "Create New Paging/Intercom Group" to add paging/intercom group.
•
Name
Extension
Type
Custom Prompt
Page/Intercom Group
Members
Firmware Version 1.0.2.5
PAGING
A ND
I NTERCOM
G ROUP
of
paging/intercom
Figure 115: Paging/Intercom Group
Table 73: Paging/Intercom Group Configuration Parameters
Configure paging/intercom group name.
Configure the paging/intercom group extension.
Select "2-way Intercom" or "1-way Page".
This option is setting a custom prompt used as announcement placed to
the person receiving a paging/internal call. The file can be uploaded from
the web GUI->Internal Options->Custom Prompt, or click the 'Prompt' to
add additional recorded.
Select available users from the left side to the paging/intercom group
member list on the right.
UCM6510 IP PBX User Manual
group
under
web
GUI->PBX->Call
Page 212 of 317