Group
S etting
Name
Number
Announcements Center feature can be found under web UI-> PBX-> Value-added Features->
Announcements Center. The following example demonstrates the usage of this feature.
1. Click
2. Give a name for the newly created group, and the Number is used later with code to send voice
message.
3. Select the extensions that want to be included in the group.
Firmware Version 1.0.2.5
Table 96: Group Setting
Configure a name for the newly created group, the name can be anything.
Configure the group number. The group number is used in combination
with code. For example, if group number is 666, and code is 55. User
dials 55666 will send prompt 55 to all members in group 666.
Note: The group number must not conflict with any other numbers, such
as extension or conference number.
to create new group.
Figure 145: Announcements Center Group Configuration
UCM6510 IP PBX User Manual
Page 270 of 317