Figure 75: Manage Extensions - Grandstream Networks UCM6510 User Manual

Status
•
Users can see the following icon for each extension to indicate the SIP status.
Green:
Blue:
Yellow:
Grey:
Edit single extension
•
Click on to start editing the extension parameters.
Reboot the user
•
Click on to send NOTIFY reboot event to the device which has an UCM6510 extension already
registered. To successfully reboot the user, "Zero Config" needs to be enabled on the UCM6510 web
GUI-­>PBX-­>Basic/Call Routes-­>Zero Config-­>Auto Provisioning Settings.
Delete single extension
•
Click on to delete the extension. Or select the checkbox of the extension and then click on "Delete
Selected Extensions".
Modify selected extensions
•
Select the checkbox for the extension(s). Then click on "Modify Selected Extensions" to edit the
extensions in a batch.
Delete selected extensions
•
Select the checkbox for the extension(s). Then click on "Delete Selected Extensions" to delete the
extension(s).
Firmware Version 1.0.2.5
Figure 75: Manage Extensions
Free
Ringing
In Use
Unavailable
UCM6510 IP PBX User Manual Page 133 of 317