Firmware Version 1.0.1.12 - Grandstream Networks UCM6510 User Manual

Added automatic backup support on SD Card or USB storage [BACKUP/RESTORE]
•
Added support to skip trunk authentication by time condition [Table 33: SIP Extension Configuration
•
Parameters – Features]
Added option to send P-­Asserted-­Identity header in SIP Register Trunk [Table 57: SIP Register Trunk
•
Configuration Parameters]
Added ability to specify trunks in CDR filters [CDR]
•
Added ability to use Pattern in Caller Number to filter CDR [CDR]
•
Added support to send UNREGISTER when VoIP trunk is disabled [Table 57: SIP Register Trunk
•
Configuration Parameters]
Added LDAP client support [LDAP CLIENT CONFIGURATIONS]
•
Added option to specify the chronological order to voice mails [Table 68: Voicemail Settings]
•
Added option to configure whether to skip pressing ½ to accept or reject calls from Follow Me [Table
•
76: Follow Me Settings]
Added option to specify port range in Port Forwarding configuration [Table 11: UCM6510 Network
•
Settings-­>Port Forwarding]
Added ability to go back to IVR menu from Dial By Name by pressing the star key [DIAL BY NAME
•
CONFIGURATION]
Added support to upgrade SIP end device via SD card in Zero Config [Table 26: Global Policy
•
Parameters – Maintenance]
Added ability to filter alert logs [ALERT LOG]
•
Added ability to delete alert logs [ALERT LOG]
•
Added NAT option for peer trunk [Table 63: Outbound Route Configuration Parameters]
•
Improved A utomatic Download CDR result format [CDR]
•
Fixed Digital Trunk SS7 signaling mode inbound / outbound call problem
•
Fixed A sterisk is crashed while using external MCB and CEI
•
FIRMWARE V ERSION 1 .0.1.12
Added Active Calls feature to monitor call status and barge in active calls [ACTIVE CALLS AND
•
MONITOR]
Added support to disable the trunk for VoIP trunk and analog trunk [Table 56: Create New SIP Trunk]
•
[Table 45: A nalog Trunk Configuration Parameters]
Added RBS support on T1 [Error! Reference source not found.]
•
Added Frame Relay support on Data Trunk [DATA TRUNK]
•
Added 'Assign CIC to D-­channel' option on SS7 settings page [Table 49: Digital Hardware
•
Configuration Parameters: E1 -­ SS7]
Added 'First CIC' option in SS7 configuration [Table 49: Digital Hardware Configuration Parameters:
•
E1 -­ SS7]
Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 17 of 317