Internal Options/Jitter Buffer; Internal Options/Rtp Settings; Table 83: Internal Options/Jitter Buffer; Table 84: Internal Options/Rtp Settings - Grandstream Networks UCM6510 User Manual

INTERNAL O PTIONS/JITTER B UFFER
SIP Jitter Buffer
Enable Jitter Buffer
Jitter Buffer Size
Max Jitter Buffer
Implementation
INTERNAL O PTIONS/RTP S ETTINGS
Firmware Version 1.0.2.5
Auto Provision Extensions: 5000-­6299
•
This sets the range for "Zero Config Extension Segment" which is the
extensions can be assigned on the UCM6510 to provision the end
device.
Conference Extensions: 6300-­6399
•
Ring Group Extensions: 6400-­6499
•
Queue Extensions: 6500-­6599
•
Voicemail Group Extensions: 6600-­6699
•
IVR Extensions: 7000-­7100
•
Fax Extensions: 7200-­8200
•
Table 83: Internal Options/Jitter Buffer
Select to enable jitter buffer on the sending side of the SIP channel. The
default setting is "No".
Configure the time (in ms) to buffer. This is the jitter buffer size used in
"Fixed" jitter buffer, or used as the initial time for "adaptive" jitter buffer. The
default setting is 100.
Configure the maximum time (in ms) to buffer for "Adaptive" jitter buffer
implementation, or used as the jitter buffer size for "Fixed" jitter buffer
implementation. The default setting is 200.
Configure the jitter buffer implementation on the sending side of a SIP
channel. The default setting is "Fixed".
Fixed
•
The size is always equal to the value of "Max Jitter Buffer".
Adaptive
•
The size is adjusted automatically and the maximum value equals to
the value of "Max Jitter Buffer".
Table 84: Internal Options/RTP Settings
UCM6510 IP PBX User Manual Page 258 of 317